Mechanized farmland safety operation points
1. Reverse operations are strictly forbidden. When making turns in the field, it is important to lift the machine slightly to reduce turning resistance and prevent damage to the working components. Before moving between fields or adjusting the implements, make sure the working parts are stopped to avoid unnecessary wear or malfunction.
2. The depth of cultivation for the cultivator is controlled by the tail wheel or skid (for hydroponic applications). To adjust the depth, loosen the pinch handle on the tail wheel bracket and move the outer tube up or down for a broader adjustment range. In most cases, you can use the handle to fine-tune the depth. It's recommended to use the outer tube only when necessary, and then make small adjustments with the handle for better control and precision.
3. When plowing, always pay attention to the direction of tillage. Try to leave only one large ridge or furrow in the field to maintain uniformity and efficiency. Avoid operating the plow under prolonged heavy loads, as this can cause the frame to bend or deform over time.
4. When using a tractor to tow a cultivator, ensure both ends of the tractor remain as close to horizontal as possible during operation. If the universal joint is raised, reduce the speed and limit the lifting height so that the angle between the two ends of the joint does not exceed 30 degrees. This helps prevent mechanical stress and ensures safe operation.
5. While working, no one should be standing behind the tiller or on the machine to prevent potential accidents. Always keep the area clear and ensure all personnel are at a safe distance from the equipment.
6. Farm implements powered by tractors require the operator to stay alert at all times. Be prepared to cut off the power immediately in case of an emergency to avoid any serious incidents or injuries.
7. When parking the tiller, always lower it to the ground and never leave it hanging in the air. Hanging the machine for extended periods can cause structural damage and affect its performance in future operations.
Allicin Raw Garlic Powder,Feed Grade Additives,Chemical Feed Grade Type,Deodorization Garlic Oi
CANGZHOU HUAYOU IMPORT & EXPORT TRADE CO., LTD. , https://www.huayoutrade.com