How to deal with data abnormality when using electronic tension machine?
In the actual application of the electronic tension machine , if there is abnormal vibration and noise of the equipment and abnormal test data, the user can refer to the following solutions:
1. The test data is abnormal:
1) Please make sure that the "test piece" is clamped correctly. If not, please hold it.
2) Please check if the “Strength Sensor†and “Decoder†settings are correct. If not, please refer to the operating instructions and the settings are completed.
3) Please check if the electronic tension machine presses the “power zero button†and “deformation zero button†before the test starts. If no, please restart the test and press the “power zero button†“deformation amount†before the test. Return to zero key."
2, abnormal vibration and noise:
1) Please check whether the four feet of the machine are in contact with the pedestal. If not, please adjust the four feet to make the average contact.
2) Check if the system power supply voltage is normal and stable. If not, please replace the stable normal power supply.
3) Check if the screws of each part of the electronic tension machine table are loose. If it is loose, tighten the screws.
Yangzhou Xintianhui Electronic Technology Co., Ltd. is a professional service manufacturer engaged in material testing and testing equipment. It integrates R&D, design, production, sales and service, and provides solutions for material testing and finished product testing.
Pipe Fittings,Pipe Bracket,Clamp Ferrule,Ss304 Clamp
Wenzhou Gaoya Light Industry Machinery Co.,ltd. , https://www.hongyafitting.com