It should be done to properly dilute pesticide
Recently, it has been found that some farmers are not scientific when applying pesticides to crops, resulting in poor spraying or causing harm to humans. The concentration of commercial pesticides is generally relatively high, such as the use of conventional methods of application, must be diluted before use. When commercial pesticides are used, different amounts of water or other diluents should be added to the pharmaceuticals to reduce the concentration of the pesticides, based on the variety of pesticides, the objects to be controlled and the type of crops, and the temperature at the time of application, etc. Pesticide dilution is correct or not. There is a great relationship between efficacy and safe use. If too much water or other diluent is used, the concentration of the agent is too low, which will reduce the effectiveness of the control. If too little water is contained, the concentration of the agent will be too high, which will cause phytotoxicity and poisoning of humans and animals. Therefore, pesticides should be strictly controlled when diluted. Pesticide diluted concentration.
Before diluting the pesticide, carefully calculate and carefully measure the amount of water used to prepare the mother liquor. Then use a medical saline bottle with a volume scale, place the pesticide in the bottle, inject the appropriate amount of water into the mother liquor, and then measure and use the cup. When using a knapsack spray, the secondary dilution can be performed directly in the tank. The correct method is to add a small amount of fresh water to the prepared pharmaceutical container, then slowly pour the quantitative medicine into water, stir gently with a wooden stick, etc., and then add enough water to mix. If you use a mobile sprayer for large area applications, use a slightly larger volume for dilution. The secondary dilution can be formulated in a sprayer pail and mixed for use.
Before diluting the pesticide, carefully calculate and carefully measure the amount of water used to prepare the mother liquor. Then use a medical saline bottle with a volume scale, place the pesticide in the bottle, inject the appropriate amount of water into the mother liquor, and then measure and use the cup. When using a knapsack spray, the secondary dilution can be performed directly in the tank. The correct method is to add a small amount of fresh water to the prepared pharmaceutical container, then slowly pour the quantitative medicine into water, stir gently with a wooden stick, etc., and then add enough water to mix. If you use a mobile sprayer for large area applications, use a slightly larger volume for dilution. The secondary dilution can be formulated in a sprayer pail and mixed for use.
Our Incubator Products is good in quality and competitive in price. We are manufacturer and supplier Incubator Products following your specific requirement. We are looking forward to your E-mail and establishing cooperative relationship with you! We would provide professional Incubator with good services for you!
Shaking Incubator, Anaerobic Incubator, Biochemical Incubator, Thermo Co2 Incubator
Ningbo Cland Medical Instruments Co., Ltd. , https://www.cland-med.com