Ultrasonic cleaning machine operation guide
First, the operation guide 1, check the cleaning tank, to ensure that there is an appropriate amount of water in the tank (water level should be at least 200mm higher than the transducer box).
2. Add an appropriate amount of cleaning agent according to the process requirements.
3. Hang the power adjustment knob to the small position of zui.
4. Close the power switch or plug the power cable into the power outlet.
5. Turn on the power switch and turn the “Power Adjustment†knob to the desired power value. The ultrasonic cleaning machine starts working.
6. When the work stops, turn the “Power Adjustment†knob to the small position of zui and turn off the power switch.
Second, maintenance 1, if the equipment is not used for a long time, please drain the cleaning solution and clean the cleaning tank.
2. If the device is not used for a long time, please turn it on once every month according to the operation guide and work for half an hour.
3. If there is any technical failure, please notify us immediately.
Third, warning 1. It is strictly forbidden to start the water in the cleaning tank.
2. It is strictly forbidden to start directly with high power.
3. If the concentration of corrosive gas on site is high, please keep the ultrasonic system away from the cleaning tank as much as possible.
4, within the power-on state and within 30 minutes of shutdown, it is strictly forbidden to touch the electronic components in the generator, and the capacitors contain high-voltage power.
Heyin Bay Leaf,Fragrant Leaf For Medicine,Fragrant Leaves Are Used As Condiments,Fragrant Leaves For Western Food
Zhejiang Shanying Trading Co.,Ltd. , https://www.shanyingtrading.com