The custody of different agricultural machinery parts

From a philosophical point of view, there is an important relationship between the whole and the parts, some of which form an integral whole, and some of the advantages and disadvantages are related to the overall good or bad. For agricultural machinery, whether the agricultural machinery parts are well-preserved or not plays a key role in the operation of the entire agricultural machinery. Therefore, agricultural machinery parts must be kept well. Precision parts such as injector couplings, discharge valve couplings and live couplings, etc., with a small gap, a slight corrosion will reduce the performance, it is scrapped. therefore. For new parts that are not used temporarily, do not open the original packaging and keep it in a dry and ventilated place. Used parts, use clean diesel to wash off coke and other dirt, assembled in pairs, placed in a container filled with clean oil level of oil in order to prevent the parts exposed from the oil surface and the air is appropriate. For new shafts or old shafts that have not been used for shaft parts, the surface finish should be coated with grease (butter) and then kept in a dry and ventilated place. Longer shafts should be placed flat or vertical, and avoid tilting so as not to cause deformation. Springs such as torsion springs, plunger springs, and pressure regulator springs for fuel injectors, etc., should be greased and stored in plastic bags. Do not expose naked or contact with harmful substances to prevent rust and reduce performance. Rubber products such as oil seals, waterproof collars, rubber linings, and tires, even if it is oil-resistant rubber products, should also be protected from oil contamination. At the same time should avoid exposure, baking, freezing or soaking. Plastic parts are most vulnerable to heat, cold or fire. Therefore, in the custody should pay attention to away from the fire, do not expose to the sun or frozen, and do not mix with metal parts or run into acid-base substances, so as to prevent aging damage. Sliding bearings such as bushes, copper bushings, powder metallurgy bushings, etc., should be kept intact during storage, and should not be mixed with other miscellaneous items, tools, etc. to prevent collision deformation and corrosion. Rolling bearings should not be used temporarily not open, should be stored in a dry and ventilated place. Used bearings should be cleaned of grease, greased, packed in plastic bags or sealed with kraft paper.

Solvent Recovery Machine industry wide application, uses a wide range of production and processing industry basically will be used, kinds of solvent solvent recovery machine Recyclable are many, Calstar® is a solvent recovery machine equipment, it can help many enterprises to save most of the money, reduce the purchase cost of solvent, solvent recovery machine was born to the society has an important significance to the environment, reduce the waste of resources, and solve the environmental pressure.

At present, to promote energy saving and emission reduction, the development of low-carbon economy has become the main theme of the development of the world economy, especially for China which is a relative shortage of resources per capita, serious ecological damage power development, in the huge pressure of energy and environment, promote energy-saving emission reduction, it is imperative to develop low carbon economy. In the Copenhagen world climate conference held in December 2009, the Chinese government commitment to the 2020 unit of GDP carbon emissions than in 2005 decreased by 40% ~ 45%. In the future, all walks of life will move towards low energy consumption, low pollution and low emission direction, the development of flexible packaging industry can not be contrarian. Soft packaging industry as one of the more serious energy consumption and pollution, in the face of increasingly prominent energy and environmental problems, should assume more social responsibility, to contribute to energy saving and emission reduction.
In China to use a large number of organic solvents, emissions of a large number of high concentration of organic waste gas is an important cause of environmental pollution caused by the soft packaging industry. At the same time, the evaporation of organic solvent in the process of use also caused the problem of indoor pollution and safety. With the increase of people's awareness of environmental protection and national environmental protection, organic emission problem of the soft packaging industry has aroused social attention, soft packaging enterprises also obviously feel the increasing pressure of environmental protection, high discharge mode used by now has been difficult to project eia. Moreover, the future of national legislation in the field of environmental protection will be more stringent, flexible packaging enterprises must be a pressing matter of the moment to take effective measures to reduce emissions and energy consumption of organic waste gas, in accordance with the national energy-saving emission reduction targets.Industry Application Recovery Machine,Solvent recovery machine application industry,Solvent recovery machine use,Solvent recovery machine

Electronics industry Solvent Recovery Machine

Industry Application Recovery Machine,Solvent Recovery Machine,Solvent Recycling Machine In Denver,Thinner Solvent Recycling Machine

SHENZHEN KUANBAO ENVIRONMENTAL EQUIPMENT CO., LTD , https://www.calstarkb.com